Test & Measurement
Your Trusted Distributor of Test and Measurement Instruments
OiTec is a distributor of advanced test and measurement instruments, specializing in electrical measurements. We provide precision instruments from leading brands, complemented by technical support, user training, maintenance, and calibration services to ensure reliable and long-term performance.
Find Your Ideal Test and Measurement Instruments
Use our sorting tool to effortlessly find the test and measurement instruments that best suit your needs. Our tool allows you to sort by manufacturer, product category or specific product.
Brands
Products
Rohde & Schwarz MXO5 Oscilloscope 2 GHz Package
o Promotion MXO54-BNDL package
o Bandwidth: 2 GHz
o Contains:
- MXO5 Series Oscilloscope 4 channels
- MXO5-B2420 2 GHZ OPTION
- MXO5-B6 ARBITARY WAVEFORM GENERATOR
- MXO5-B110 MEMORY OPTION 1GPTS
- MXO5-K12 JITTER ANALYSIS
- MXO5-K31 POWER ANALYSIS
- MXO5-K36 FREQ. RESPONSE ANALYSIS
- MXO5-K500 BUS ANALYSIS: SERIAL TRIGGER & DECODING
- MXO5-K510 LOW SPEED SERIAL BUSES
- MXO5-K520 AUTOMOTIVE PROTOCOLS
- MXO5-K530 AEROSPACE PROTOCOLS
- MXO5-K550 MIPI LOW SPEED PROTOCOLS
- MXO5-K560 AUTOMOTIVE ETHERNET BUSES
o Promotion valid until March 31st, 2026
Rohde & Schwarz Oscilloscope Promotion Flyer
Price 40200 € ALV 0%
Rohde & Schwarz MXO5 Oscilloscope 2 GHz Package
o Promotion MXO58-BNDL package
o Bandwidth: 2 GHz
o Contains:
- MXO5 Series Oscilloscope 8 channels
- MXO5-B2820 2 GHZ OPTION
- MXO5-B6 ARBITARY WAVEFORM GENERATOR
- MXO5-B110 MEMORY OPTION 1GPTS
- MXO5-K12 JITTER ANALYSIS
- MXO5-K31 POWER ANALYSIS
- MXO5-K36 FREQ. RESPONSE ANALYSIS
- MXO5-K500 BUS ANALYSIS: SERIAL TRIGGER & DECODING
- MXO5-K510 LOW SPEED SERIAL BUSES
- MXO5-K520 AUTOMOTIVE PROTOCOLS
- MXO5-K530 AEROSPACE PROTOCOLS
- MXO5-K550 MIPI LOW SPEED PROTOCOLS
- MXO5-K560 AUTOMOTIVE ETHERNET BUSES
o Promotion valid until March 31st, 2026
Rohde & Schwarz Oscilloscope Promotion Flyer
Price 57400 € ALV 0%
Rohde & Schwarz MXO4 Oscilloscope 1.5 GHz Package
o Promotion MXO44-BNDL package
o Contains:
- MXO4 Series Oscilloscope 4 channels
- MXO4-B2415 1.5 GHz BANDWIDTH UPGRADE
- MXO4-B6 ARB. GENERATOR
- MXO4-B108 800 MPTS MEMORY
- MXO4-K12 JITTER ANALYSIS
- MXO4-K31 POWER ANALYSIS
- MXO4-K36 FREQ. RESPONSE ANALYSIS
- MXO4-K500 BUS ANALYSIS: SERIAL TRIGGER & DECODING
- MXO4-K510 LOW SPEED SERIAL BUSES
- MXO4-K520 AUTOMOTIVE PROTOCOLS
- MXO4-K530 AEROSPACE PROTOCOLS
- MXO4-K550 MIPI LOW SPEED PROTOCOLS
- MXO4-K560 AUTOMOTIVE ETHERNET BUS
o Promotion valid until March 31st, 2026
Rohde & Schwarz Oscilloscope Promotion Flyer
Price 25900 € ALV 0%
ZES Zimmer LMG671 Precision Power Analyzer
o 1 to 7 (-x) Phases + Sensor inputs
o AC Power Accuracy 0.015 % + 0.01 %
o Full dynamic ranges AC/DC
3 mV to 1000 / 1500 V (3.2 kVpeak)
500 μA to 32 A (120 Apeak)
o DC .. 10 MHz, A/D resolution 18 bit
o Dual Path (150 kS/s, 1.2 MS/s), Scope Function
o Harmonics & interharmonics 2000th, Flicker
o LAN, CAN, USB3.0, RS-232
o PC software, Labview, SCPI
o Calibration certificate:
traceable or accredited ISO17025
LMG611 1 Phase Datasheet
LMG641 4 Phases Datasheet
LMG671 1-7 Phases Datasheet
MI Spekter MST-204 Machinery Switchgear Tester
Machinery, Switchgear, Welding machine etc. Tester
o EN60204-1, EN61439-1, EN609474-4, EN61180, EN50678/ VDE0701, EN50699/ VDE 0702, EN61557-x, EN61610, EN61326
o 1- and 3-phase
o HiPot 250 – 5100 V AC (500 VA), current range 0 .. 200 mA
o R PE (GB) 0.2, 10, 25 A AC, Range 0.012 – 2000 Ohm
o R INS 50 .. 1000 V DC, Range 0.12 – 100 Mohm
o I Leakage 0.1 – 1000 mA
o Loop impedance, Line impedance, Short circuit currents, Voltage drop
o RCD, IMD, RCM testing, Touch current, Phase Rotation, Residual voltage, Voltage SELV etc.
o Functionals tests and documentation
o Cables and Test leads, rugged case, Report software
Price 3170 € ALV 0%
MI Spekter HVA-204 High-Voltage Adapter for MST-204
o Using the High Voltage Adapter (HVA-204), you can expand the main unit with HV AC capabilities
o 250 – 5100 V AC (500 VA)
Price 1310 € ALV 0%
MI Spekter ECT-752 EV Charging Cable Tester
Standalone solution for testing Mode 3 and Mode 2 EV charging cables
o IEC 61851, EN 62752, EN 60678, EN 50699
o User-friendly operation allows automatic testing of the cables without user intervention
o Customizable Test Plans generated on the MIControl application and transferred to the device
o Evaluation of test results based on standard or customizable limits
o Bluetooth or USB C connection for data export/import and report generation using MiControl application
o No compensation of test leads required
Price 3170 € ALV 0%
MI Spekter CST-322 Charging Station Tester
The CST-322 Charging Station Tester is designed to test the functionality
and safety of Mode 2 and Mode 3 single-phase and three-phase Electric
Vehicle Supply Equipment (EVSE) with fixed cables or direct socket
connections.
o EN 61851-1, EN 60364-7-722, 61010-1, EN 61010-2-30, EN 61326-1
o AUTOTEST functionality for quick and simple testing
- Visual inspection
- Mains voltage
- Mains voltage (3P sequence)
- CP State analysis
- PE Error
- CP Error
- CP Diode Error
- RCD trip time tests
- CP State hysteresis
o Supports Mode 2 and Mode 3 single phase or three phase EVSE with fixed or
detachable cable
o L1, L2, L3, N, PE 4 mm output terminals for connection of an installation tester
o Schuko socket for connecting an installation tester or mains loading (selectable
phase L1, L2, L3)
o Smart phone App for creation of test reports
o Battery or mains power supply, makes the instrument usable for indoor or field use
Price 1340€ ALV 0%
MI Spekter MT-204 Machinery Tester
o EN 60204-1
o Functions
- Measurement of protective earth resistance
- Loop/Line impedance measurement
- Insulation resistance measurement
- Residual voltage measurement
- High-voltage test
o 10 A test current for protective earth resistance
o 0.2 A test current for protective earth resistance
o Loop/line impedance measurement up to 440 V
o Display of short circuit current (PSC)
o Insulation measurement with 250 V to 500 V test voltage
o Residual voltage measurement; display of discharge voltage/time
o Integrated high-voltage test
Price 1950€ ALV 0%
MI Spekter Battery Analyzer 12V/800A
o Automatically stores set parameters and measures results
o Built-in printer
Automatic battery analysis:
- Charging.
- Measuring Capacity or Reserve Capacity.
- Charging.
- Measuring Current Capacity and Internal Resistance.
- Measuring Capacity test.
o Starting Capacity / 100 to 800 A – 3 to 15 s
o Current Capacity in % of IN and Internal Resistance Rb in mΩ
o Reserve Capacity RC in min / 25 A
o Capacity C in Ah / C/20
o Battery charger / C/10
Price 1770 € ALV 0%
Novker NK5520 Smart-OTDR
o 5.6" Capasitive touch display, dual operation with display and keys
o Dynamic range 30-32 dB
o Multiple functions
- Auto OTDR
- Event Map
- Optical Power Meter
- Visual Fault Locator
- Light source
- RJ45 Cable tracing & length test
- Optical loss test
- Computer-level file management
o 1310/1550 nm Wavelength
o Measurement range 100 m - 260 km, pulse width 5 ns - 20 µs
o Blind zones: Event ≤ 1.5 m, Attenuation ≤ 8 m
o Accuracy ±(0.75 m + sampling interval + 0.0025% × distance)
o Internal memory 8GB
o 7.4 V / 5200 mAh Lithium battery, up to 10h operation
Novker NK4000 Mini-OTDR
o 4.3" Capacitive touch display
o Dynamic range up to 26 dB
o Multiple functions
- Auto OTDR
- Event Map
- Optical Power Meter
- Light Source
- Visual Fault Locator
- RJ45 Cable tracing and sequencing
- RJ45 Length measurement up to 300m
- Computer-level file management
o 1310/1550 nm Wavelength (1310, 1550, 1610 nm variants)
o 500m - 100 km Measurement range, pulse width 3 ns - 20 µs
o Blind Zones: Event 2.5 m, Attenuation 8 m
o Accuracy ±(1 m + sampling interval + 0.005% × distance)
o Internal memory 8 GB
o 3.7V / 4000 mAh Lithium battery, > 8 h operation
Danisense Zero-Flux current transducers
0.0x – 150 – 300 .. .. 5000 – 11 000 A DC/AC
DS600ID
o 600 Arms, 1000 Apeak
o High Dynamic Range
o DC .. 500 kHz, 1500:1
o Linearity 1 ppm, extreme stability
o Ø27.6 mm
o U or I signal output to power analyzer, scope, logger, DMM ..
o DSSIU power supply & interface unit (1, 4, 6 ch)
o Option: accredited ISO17025 calibration
Danisense DSSIU-6-1U Current Transducer Interface Unit
Dedicated 1-6-channel system interface unit for ultra-stable, high precision fluxgate technology DS series current transducers
o Compact 19” rack mount 1U height
o Current transducers’ output signals available via 4mm banana plugs
o Individual or serial access to calibration windings of all transducers via 4mm banana plugs
o 15-pin DSUB connector provides access to isolated status signals of each transducer and power
o Universal autorange (100-240V AC 50-60Hz) AC input voltage or 127–370V DC input voltage.
o Powers up to 6 x Transducers from the DT-series, DS-series, DQ-series, DN-series, DM-series or DL-series at the same time
Chroma 6200D Series Bidirectional DC Power Supply
o Voltage rating: 0~100 V/600 V/1200 V/1800 V/2000 V
o Current rating : 0~540 A
o Power rating : 6 kW/12 kW/18 kW@3U, 36 kW/45 kW@4U, parallel up to 540 kW
o Two-quadrant operation: source and load functions
o Auto sequencing programming
o High speed transient response <1.5ms
o Low output noise and ripple
o Solar array simulation function (Option)
o USB/LAN/CAN/GPIB/APG+CAN FD on 2000V models
Pacific Power Source AFX Series Programmable AC & DC Source
o AC/DC Power, Voltage & Current Source
o Single, Split, Three-Phase
o Up to 15 kVA in 4 U chassis, parallel up to 180 kVA
o Up to 333 Vac L-N, 520 Vac L-L, ±425 Vdc
o 15-1500 Hz. 1-3000 Hz Option
o 85% Energy Efficiency
o Multi-Channel Testing Capability with Unique 6 Form Configuration
o Constant Power and Seamless Switching between AC and DC
o Harmonics with interharmonics Option
o Phase Angle Programming, Programmable Impedance
o USB Type B, LAN, GPIB / IEEE488, RS232
o Clear Webserver GUI, Labview, SCPI
Pacicific Power Source AGX Series Regenerative AC & DC Power Source
o AC/DC Power, Voltage & Current Source
o Single, Split, Three-Phase, 4Q
o 6kVA/ kW up to 21kVA/kW in a 4U
o Up to 189kW per cabinet, dual cabinets in parallel up to 252kW
o Three-Phase High Power Systems up to 756kW
o 350 Vac L-N, 606 Vac L-L, ±500 Vdc
o 15 Hz-1200 Hz, Extended Mode 1 – 3000 Hz
o Regenerative Power Over 90%
o Programmable Output Impedance Real-Time & RMS modes (R+L); Resistive -10 to +10 Ohm, Inductive 0 to 2 mH
o Harmonic measurement for voltage and current on all phases
o RS-232, USB, Modbus, TCP, GPIB, SCPI compatibility; IVI Instrument Drivers
NGI N9000 Series Modular Multi-Channel Battery Simulator
o BMS testing for energy storage systems, electric vehicles, base station power supplies, HIL, AFE chips
o 4-36 Isolated channels, 4 channels per module
o 0-6V, ±5A, μA level current measurement
o Modules for 0.1 /0.5 mV accuracy battery simulator, temperature simulation (12/24/36 CH, 1 Ω resolution), programmable power supply (1200 or 2500 V / 100 mA)
o High integration: 36CH cell simulation+36CH fault simulation+36CH temperature simulation + total voltage simulation integrated in 19inch/4U chassis
o Command response ≤ 1 ms, inter-channel sync ≤ 200 µs, rise time ≤ 40 µs on full load
o Isolation ratings: 2000 V DC output-to-ground; 500 V DC channel-to-channel
o LAN & CAN-FD interface; dual LAN ports
Graphtec GL2000 / GL980
o 4 / 8 analog channels
o Isolated BNC and Screw terminal (M3.5) connections
o Ext input/output Logic/Pulse (4) Trigger/sampling (1)
o 1 MS/s, DC .. 200 kHz, 16 bit A/D
o Memory: Fast RAM 4M/ch, Flash 3.9 GB, USB/SD memory card
Recording directly to memory 1 MS/s .. 100 kS/s .. 1 S/s.
o Ranges: 20 mV .. 500 V .. 1000 V (DC, ACrms)
1 – 5 VDC (4-20 mA), TC K .. W, Humidity 0..100 %
o Advanced Triggers
o CAT III 600 V
o Webserver, FTP, NTP, DHCP, email functions
o LAN, USB, SD
Scope CFL PL4+ Cable Fault Pre-Locator
o Modes of operations
- TDR / Low Voltage Pulse-echo
- SIM / MIM / ARC, ICM / ICE
- Voltage Decay
o Sampling Rate 800 MHz
o Measurement Range up to 256 km
o Measurement Accuracy 0.025% to 0.2%
o 18 V and 86 V selectable OCV
o Pulse width 10 nS to 100 μS
Scope CFL SG 3220 Surge Generator
o Voltage ranges 0 – 8kV / 16kV / 32kV
o Output Energy max. 2000 J
o SIM/ARM/MIM method for High resistance & flashing faults
o Fault location on all types of power cables from LV to EHV
o Hipot DC, Burn Down, Sheath Fault
o Cables up to 50 m
CAENels BatReg Bi-directional & Re-generative Battery Cycler
o DC Source & DC Load
o CC, CV, CP
o 0 - 10/ 20/ 40/ 50/ 100 V, +/- 150 A, 1500 W
o Output accuracy 0.01 %
o Waveform generator, 4 ch Oscilloscope, 24 bit A/D
o Switching freq 200 kHz, sampling 100 ksps
o Webserver GUI
Ainuo ANEVH Series – Re-generative DC Source & Load
o Ranges 100/ 300/ 500 .. 2250 V, 25/ 40/ 80/ 120 .. 1080 A,
5/ 10/ 15/ 21/ 30/50 kW .. 1 MW
o Battery tester & simulator, Solar simulator (MPPT, I/V)
Fuel cell, OBC, UPS etc. test
o Built-in function generator, arbitrary wave generation
o Built-in voltage curves for DIN40839, ISO-16750-2 and ISO21848 standard automotive grids
o Accurate voltage and current measurement
o Efficiency up to 95%, 3U chassis
o CAN/ RS232/ 485/ LAN/ USB, GPIB
Keysight DAQ970A/DAQ973A Data Acquisition Systems
o 3-slot mainframes with built-in 6 ½ digit DMM
o Basic 0.003% DCV accuracy
o Up to 1 million points memory
o Up to 120 channels per system
o LAN, USB
o Temperature: TC, RTD, thermistor;
dc/ac voltage; 2- and 4-wire resistance;
frequency and period; dc/ac current,
capacitance; direct strain and bridge strain
KEP SWG-12 Cable test and fault location system
o Testing insulation of power cables with DC voltage up to 32 kV
o Burning with DC current up to 100 mA at up to 32 kV voltage
o Pre-location methods
- TDR, ARC / ARC multi-shot, ICE, DECAY
o Pinpointing cable faults with an acoustic method with up to 2000 J surge wave generator and a suitable signal receiver
o USB-A, USB-B, RS-485 interfaces
SSL Resource SSL S-680 series Spectroradiometer
o 200 – 450 – 1050 – 2xxx nm
o WL bandwidth: 1 nm, 5 nm, 10 nm
o Accuracy 0.5 nm
o SN ratio >300, Stray light < 0.1 %
o Automatic integration time
o Wavelength calibration
o Measuring head: irradiance / radiance
o Made in Finland
SMC Quasar Smart Relay Tester
o 4 x 300V + 3 x 60A outputs
Switchable to 7 current outputs
o Extra 3 high currents by Quasar-3C
o 6 binary inputs + 4 binary outputs
o External DC current and voltage measurement
o 6 low-level outputs to test sensors, meters etc, and to upgrade with more channels
o Wi-Fi, LAN, dedicated IEC-61850 port
+ Expansion port, PC/ tablet/ Smartphone
o Rugged case for field, 19.5 kg
Ainuo AN1636(F)/38(F)/39(F) Series Multi-channel Intelligent Electrical Safety Analyzer
o Five in one: multifunction combination: ACW/DCW/IR/GB/DCGB
o High Accuracy: 1% basic accuracy for safety regulation and optional waveform display
o High velocity: optional parallel grounding and insulation withstand voltage tests
o Android platform, data storage, barcode recognition, and MES connection
o HiPot AC 5 kV/ 100mA, DC 6 kV/ 20mA,
IR 6 kV/ 100 GΩ, GB 64 A AC/600mΩ,
GB DC 40 A DC/ 600mΩ, DC low 0.02 – 20.000 Ω
Leakage current
o Muxer
o LAN/ RS232/ CAN/ PLC
BRS Messtechnik BIM2B Battery Cell Impedance Analyzer
o Voltage ranges 0 - 5 V
o Impedance ranges 1 mOhm .. 1 Ohm (7 ranges)
o Impedance frequencies 0.1 .. 1000 Hz
o Quick test 1 sec (U, impedance 1 kHz & 10 Hz)
Analysis 12 – 84 sec depending on freq:
Resistance, Reactance, Nyqvist plot
o Multiplexer à 8/ 16 .. channels
Chroma 19032 / 19032-P Series Electrical Safety Analyzer
o Hipot AC/DC 5/6 kV (200/500 VA, 100 mA)
IR 1 kV, GB 40/60 A AC
EN/IEC leakage currents
o Multi-channel 56 ch (Scanner)
o RS, GPIB, Labview, SCPI
Contact Us
Test & measurement instrument sales & support
- Yrjö Inkinen
- +358 400 211 997
- yrjo.inkinen@oitec.fi